Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
2
- Base Plate
- 2 steps
- Power Button
- 3 steps
Flags
0
BackRival CM4015
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Plate
- Remove the three 16 mm tri-point screws from the base plate.
Remove the three 16 mm tri-point screws from the base plate.
1024
Step 2
- Remove the base plate by pressing the plastic body away from the metal plate with your thumbs.
Remove the base plate by pressing the plastic body away from the metal plate with your thumbs.
Step 3
Power Button
- Remove the 8mm Phillips screw that attaches the power button to the inside of the coffee maker.
Remove the 8mm Phillips screw that attaches the power button to the inside of the coffee maker.
Step 4
- Use a flat head screwdriver to pry the power button from its slot in the body of the device.
- Make sure the tool is pressed securely under the plastic clip, in order to not break it.
Use a flat head screwdriver to pry the power button from its slot in the body of the device.
Make sure the tool is pressed securely under the plastic clip, in order to not break it.
Step 5
- Clean both the button and its slot before replacing the power button.
Clean both the button and its slot before replacing the power button.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Connor Tustin
Member since: 10/06/2016
204 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 10-6, Livingston Fall 2016
Member of Cal Poly, Team 10-6, Livingston Fall 2016
CPSU-LIVINGSTON-F16S10G6
5 Members
6 Guides authored
