Difficulty

Very easy

Steps

8

Time Required

                          5 - 10 minutes

Sections

1

  • Rival Crock-ette 1 Quart Slow Cooker 3205 Disassembly
  • 8 steps

Flags

0

  • BackRival Crock-ette 1 Quart Slow Cooker 3205

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rival Crock-ette 1 Quart Slow Cooker 3205 Disassembly
  • This is the make and model number of the device.

This is the make and model number of the device.

1024

Step 2

  • Flip the device upside down.

Flip the device upside down.

Step 3

  • Using pliers, remove the black rubber cover from the bolt.

Using pliers, remove the black rubber cover from the bolt.

Step 4

  • With a 3/8" wrench, remove the nut from the bolt.
  • This may take some force.

With a 3/8" wrench, remove the nut from the bolt.

This may take some force.

Step 5

  • Remove the cover from the bottom of the machine.
  • This will take lots of force and may require a mix of twisting and pulling.

Remove the cover from the bottom of the machine.

This will take lots of force and may require a mix of twisting and pulling.

Step 6

  • Remove the power cord from the notch on the side.

Remove the power cord from the notch on the side.

Step 7

  • Pull the side up and away from the base of the machine.

Pull the side up and away from the base of the machine.

Step 8

  • Using pliers, pry the notches on the sides away from the metal and pull until the sides separate.
  • This will require lots of force.
  • The sides of the metal are sharp; be cautious.

Using pliers, pry the notches on the sides away from the metal and pull until the sides separate.

This will require lots of force.

The sides of the metal are sharp; be cautious.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Attached Documents

  • Schematic
  • PDF - 44.23 kb
  • View

Schematic

PDF - 44.23 kb

Author

                                      with 1 other contributor 


                    Arden Velenchik

Member since: 09/14/2022

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Tufts University School of Engineering, Team 1-3, Bell Fall 2022                        

                                                  Member of Tufts University School of Engineering, Team 1-3, Bell Fall 2022 



                    TUFTS-BELL-F22S1G3                     


                                            2 Members                     


                                            1 Guide authored