Difficulty

Easy

Steps

10

Time Required

                          5 minutes

Sections

1

  • Rival Crock Pot 3120 Disassembly
  • 10 steps

Flags

0

  • BackRival Crock Pot 3120

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rival Crock Pot 3120 Disassembly
  • Remove the lid from the crockpot and turn the device over, so that the bottom faces up.

Remove the lid from the crockpot and turn the device over, so that the bottom faces up.

1024

Step 2

  • Use your fingers to remove the rubber end cap from the bolt on the bottom of the device.

Use your fingers to remove the rubber end cap from the bolt on the bottom of the device.

Step 3

  • Using a 10mm wrench, remove the metal nut on the bottom of the device.
  • If the bolt connected to the nut appeared to fall into the device this is not an issue. It is connected to a metal bar within the device, so it cannot be lost.

Using a 10mm wrench, remove the metal nut on the bottom of the device.

If the bolt connected to the nut appeared to fall into the device this is not an issue. It is connected to a metal bar within the device, so it cannot be lost.

Step 4

  • Using your hands, pull the plastic dial off the side of the device.

Using your hands, pull the plastic dial off the side of the device.

Step 5

  • Remove the nut behind the dial using a 16mm wrench.
  • Once the nut has been loosened you can finish unscrewing it with your hand.

Remove the nut behind the dial using a 16mm wrench.

Once the nut has been loosened you can finish unscrewing it with your hand.

Step 6

  • Remove the bottom panel using your hands.

Remove the bottom panel using your hands.

Step 7

  • Slide the power cord out of its slot in the metal casing.

Slide the power cord out of its slot in the metal casing.

Step 8

  • Pull the rotary switch out from inside the metal casing.

Pull the rotary switch out from inside the metal casing.

Step 9

  • Slide the metal casing up and away from the internal components of the device.

Slide the metal casing up and away from the internal components of the device.

Step 10

  • You have now successfully disassembled your device. From here you can troubleshoot or replace any specific parts.

You have now successfully disassembled your device. From here you can troubleshoot or replace any specific parts.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Attached Documents

  • CrockPotSchematic
  • PDF - 29.36 kb
  • View

CrockPotSchematic

PDF - 29.36 kb

Author

                                      with 2 other contributors 


                    Cole J. Morrel

Member since: 09/14/2022

181 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Tufts University School of Engineering, Team 1-6, Bell Fall 2022                        

                                                  Member of Tufts University School of Engineering, Team 1-6, Bell Fall 2022 



                    TUFTS-BELL-F22S1G6                     


                                            2 Members                     


                                            1 Guide authored