Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

1

  • Turning Gears
  • 8 steps

Flags

0

  • BackRival Mini Chopper MC-67BL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Turning Gears
  • Twist the plastic lid counterclockwise to unlock it.
  • Lift the lid to remove it from the container.

Twist the plastic lid counterclockwise to unlock it.

Lift the lid to remove it from the container.

1024

Step 2

  • Carefully remove the blade from the container.
  • For reassembly, the teeth on the metal shaft line up with slots on the inside of the plastic hole.

Carefully remove the blade from the container.

For reassembly, the teeth on the metal shaft line up with slots on the inside of the plastic hole.

Step 3

  • With your hand, twist the container counter-clockwise until it unlocks from the base. Remove the container by lifting it straight up.

With your hand, twist the container counter-clockwise until it unlocks from the base. Remove the container by lifting it straight up.

Step 4

  • Use your fingers to pry out the two rubber feet from the bottom cover of the base.
  • The two feet furthest from the button tower contain screws. The other two feet do not.

Use your fingers to pry out the two rubber feet from the bottom cover of the base.

The two feet furthest from the button tower contain screws. The other two feet do not.

Step 5

  • Use the Phillips #2 screwdriver to unscrew the two 12.7-mm screws underneath the rubber feet.
  • Use the same screwdriver to unscrew the 15.88-mm screw from the back of the chopper.

Use the Phillips #2 screwdriver to unscrew the two 12.7-mm screws underneath the rubber feet.

Use the same screwdriver to unscrew the 15.88-mm screw from the back of the chopper.

Step 6

  • Firmly lift the bottom cover off of the base.

Firmly lift the bottom cover off of the base.

Step 7

  • Remove the smaller white gear by lifting it up with your hand.

Remove the smaller white gear by lifting it up with your hand.

Step 8

  • Use a pair of pliers or any other clamping tool to securely hold the blade-shaft that sits above the base.
  • Grab the gear with your other hand and turn CLOCKWISE. Unlike most screws, the gear is reverse-threaded to allow the blade to spin.
  • Continue turning the gear until completely removed from the blade-shaft.

Use a pair of pliers or any other clamping tool to securely hold the blade-shaft that sits above the base.

Grab the gear with your other hand and turn CLOCKWISE. Unlike most screws, the gear is reverse-threaded to allow the blade to spin.

Continue turning the gear until completely removed from the blade-shaft.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Roxanne

Member since: 10/17/2013

522 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 4-29, Amido Fall 2013                        

                                                  Member of Cal Poly, Team 4-29, Amido Fall 2013 



                    CPSU-AMIDO-F13S4G29                     


                                            4 Members                     


                                            5 Guides authored