Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes

Sections

2

  • How to Open the Rocketfish RF-WHTIB-A Receiver
  • 3 steps
  • Receiver Wireless Audio Module Chip
  • 3 steps

Flags

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackRocketfish RF-WHTIB-A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              How to Open the Rocketfish RF-WHTIB-A Receiver
  • Remove the 4 rubber tabs on the bottom side of the receiver.

Remove the 4 rubber tabs on the bottom side of the receiver.

1024

Step 2

  • Unscrew the four 12 mm screws on the bottom side of the receiver.
  • Use a Phillips #1 screwdriver for this step.

Unscrew the four 12 mm screws on the bottom side of the receiver.

Use a Phillips #1 screwdriver for this step.

Step 3

  • Remove top casing from the receiver.
  • The receiver top casing is difficult to remove. Internal clasps may have to be broken in order to remove the top casing (this will not effect the device’s function)

Remove top casing from the receiver.

The receiver top casing is difficult to remove. Internal clasps may have to be broken in order to remove the top casing (this will not effect the device’s function)

Step 4

              Receiver Wireless Audio Module Chip
  • Unscrew the 10 mm screw holding the wireless audio module.

Unscrew the 10 mm screw holding the wireless audio module.

Step 5

  • Slide the black retaining flap securing the ribbon cable away from the white bar.
  • There should be only a small space between the white bar and black retaining flap.
  • You may want to use tweezers for this step.

Slide the black retaining flap securing the ribbon cable away from the white bar.

There should be only a small space between the white bar and black retaining flap.

You may want to use tweezers for this step.

Step 6

  • Using your fingers, slide the ribbon cable out from the under the black retaining flap to completely disconnect it from the device.

Using your fingers, slide the ribbon cable out from the under the black retaining flap to completely disconnect it from the device.

To install the new wireless audio module chip, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Caitlin Charlton

Member since: 03/22/2015

735 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Baylor, Team 4-2, Williams Spring 2015                        

                                                  Member of Baylor, Team 4-2, Williams Spring 2015 



                    BU-WILLIAMS-S15S4G2                     


                                            3 Members                     


                                            6 Guides authored