Difficulty
Moderate
Steps
3
Time Required
10 - 20 minutes
Sections
2
- ROG Strix G15 G512LI Disassembly
- 2 steps
- M.2 SSD Replacement
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackROG Strix G15 (G512)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removing The Cover
- Remove the screws from the compartment cover, As show in the diagram, unscrew the screws labeled “A” first. before unscrewing “B”, Don’t remove screw “B” from the cover.
Remove the screws from the compartment cover, As show in the diagram, unscrew the screws labeled “A” first. before unscrewing “B”, Don’t remove screw “B” from the cover.
1024
Step 2
- Remove the panel, but be careful as there are 2 cables linking the RGB light bar to the motherboard, carefully and gently detach them from the motherboard and lift the panel.
Remove the panel, but be careful as there are 2 cables linking the RGB light bar to the motherboard, carefully and gently detach them from the motherboard and lift the panel.
Step 3
Installing The SSD
- Locate the M.2 SSD slots, the First and Third slots both support SATA and PCIe NVMe M.2 SSDs, and the second M.2 Slot only supports PCIe NVMe SSDs
- Next, Insert the NVMe SSD, and screw the SSD into place with the retaining screws
Locate the M.2 SSD slots, the First and Third slots both support SATA and PCIe NVMe M.2 SSDs, and the second M.2 Slot only supports PCIe NVMe SSDs
Next, Insert the NVMe SSD, and screw the SSD into place with the retaining screws
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
June
Member since: 09/28/2021
377 Reputation
3 Guides authored
Badges:
10
+7 more badges
fethallah - Dec 27, 2022
Reply
how to fix the light bar i have one side wont light on