Roku 3 A C Power Port Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          20 minutes

Sections

Motherboard
6 steps
A/C Power Port
2 steps

Flags

BackRoku 3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Motherboard

Place the Roku 3 on the table face down and orient it so you can correctly read the writing.

Place the Roku 3 on the table face down and orient it so you can correctly read the writing.

1024

Step 2

Pull back the rubber protection in the top right corner to locate the screw.
Repeat with the bottom right corner and bottom left corner.

Pull back the rubber protection in the top right corner to locate the screw.

Repeat with the bottom right corner and bottom left corner.

Step 3

Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.

Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.

Step 4

Open the device by gently lifting the bottom half away from the top half of the device.

Open the device by gently lifting the bottom half away from the top half of the device.

Step 5

Use your fingers to carefully lift the motherboard from the top half of the device.

Use your fingers to carefully lift the motherboard from the top half of the device.

Step 6

Pull away the IO shield from the motherboard using your hands.

Pull away the IO shield from the motherboard using your hands.

Step 7

              A/C Power Port

Turn over the motherboard so the back is face up and almost all large silver components are resting facedown on the table.
Orient it such that the backside of the HDMI port is in your upper right corner.

Turn over the motherboard so the back is face up and almost all large silver components are resting facedown on the table.

Orient it such that the backside of the HDMI port is in your upper right corner.

Step 8

Desolder the connections of the A/C Power Port on the motherboard.
Remove the port.
For more information on soldering, check out iFixit’s Soldering Guide.

Desolder the connections of the A/C Power Port on the motherboard.

Remove the port.

For more information on soldering, check out iFixit’s Soldering Guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Andy Hak

Member since: 10/07/2016

250 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 15-2, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 15-2, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S15G2                     


                                            3 Members                     


                                            6 Guides authored

Bo Northwest Designs of SE - Aug 29, 2018

What’s the size and name of the actual jack? Where do I get a replacement one?

Introduction#

What you need#

Team#

Introduction

What you need

Team