Difficulty
Easy
Steps
6
Time Required
25 minutes
Sections
1
- Motherboard
- 6 steps
Flags
0
BackRoku 3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Place the Roku 3 on the table face down and orient it so you can correctly read the writing.
Place the Roku 3 on the table face down and orient it so you can correctly read the writing.
1024
Step 2
- Pull back the rubber protection in the top right corner to locate the screw.
- Repeat with the bottom right corner and bottom left corner.
Pull back the rubber protection in the top right corner to locate the screw.
Repeat with the bottom right corner and bottom left corner.
Step 3
- Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.
Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.
Step 4
- Open the device by gently lifting the bottom half away from the top half of the device.
Open the device by gently lifting the bottom half away from the top half of the device.
Step 5
- Use your fingers to carefully lift the motherboard from the top half of the device.
Use your fingers to carefully lift the motherboard from the top half of the device.
Step 6
- Pull away the IO shield from the motherboard using your hands.
Pull away the IO shield from the motherboard using your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Samantha Miller
Member since: 10/06/2016
287 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 15-2, Livingston Fall 2016
Member of Cal Poly, Team 15-2, Livingston Fall 2016
CPSU-LIVINGSTON-F16S15G2
3 Members
6 Guides authored
Elias Herrera - Jun 14, 2018
Reply
Buenas tardes exelente guía
06xcat - May 27, 2019
Joseph Pigott - Jun 5, 2021
Reply
Great where to you get the motherboard?
