Difficulty

Easy

Steps

6

Time Required

                          5 - 8 minutes

Sections

1

  • Remote Control Motherboard
  • 6 steps

Flags

0

  • BackRoku 4

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remote Control Motherboard
  • Place the remote control facing down on the table, so that the buttons are facing downwards.

Place the remote control facing down on the table, so that the buttons are facing downwards.

1024

Step 2

  • Remove the battery compartment cover from the back of the remote by sliding it outwards. This should reveal the batteries.

Remove the battery compartment cover from the back of the remote by sliding it outwards. This should reveal the batteries.

Step 3

  • Remove the batteries from the battery compartment.

Remove the batteries from the battery compartment.

Step 4

  • Turn the Phillips PH0 screwdriver counterclockwise to carefully remove the 6.9 mm screw located between both battery compartments .

Turn the Phillips PH0 screwdriver counterclockwise to carefully remove the 6.9 mm screw located between both battery compartments .

Step 5

  • Wedge a plastic opening tool into the seam between the top cover and bottom casing of the device to create a gap.
  • Prying open the remote is quite difficult and requires a large amount of force. Use caution to avoid breaking the device or hurting yourself.
  • Once you have created a gap large enough for your fingers to fit between, separate the top cover from the bottom plastic casing by pulling them apart gently.

Wedge a plastic opening tool into the seam between the top cover and bottom casing of the device to create a gap.

Prying open the remote is quite difficult and requires a large amount of force. Use caution to avoid breaking the device or hurting yourself.

Once you have created a gap large enough for your fingers to fit between, separate the top cover from the bottom plastic casing by pulling them apart gently.

Step 6

  • Using your right thumb, lift up on the left side of the motherboard to remove it from the bottom plastic casing.

Using your right thumb, lift up on the left side of the motherboard to remove it from the bottom plastic casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Hank Harrison

Member since: 03/26/2017

428 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Baylor, Team S5-G4, Williams Spring 2017                        

                                                  Member of Baylor, Team S5-G4, Williams Spring 2017 



                    BU-WILLIAMS-S17S5G4                     


                                            3 Members                     


                                            4 Guides authored