Roku Xd 2050X Composite Video Port Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes            

Sections

2

• Case
• 5 steps
• Composite Video Port
• 1 step

Flags

0

• BackRoku XD 2050X

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Case               

• Ensure the Roku XDis unplugged.
• Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.
• Turn the device upside down.
• Remove the two rubber pads using a plastic spudger.

Ensure the Roku XDis unplugged.

Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.

Turn the device upside down.

Remove the two rubber pads using a plastic spudger.

1024

Step 2

• Remove the two Phillips #1 9mm pan-head screws.

Remove the two Phillips #1 9mm pan-head screws.

Step 3

• Insert spudger between upper and lower frame underneath the port access.
• Guide spudger around to loosen upper and lower frame to pry frame apart.
• Gently remove upper frame.

Insert spudger between upper and lower frame underneath the port access.

Guide spudger around to loosen upper and lower frame to pry frame apart.

Gently remove upper frame.

Step 4

• Remove the two Phillips #1 8mm pan-head screws.

Remove the two Phillips #1 8mm pan-head screws.

Step 5

• On the side of the board opposite the ports, find and tilt back the tab securing the board in place.
• Lift the motherboard out of the lower frame.

On the side of the board opposite the ports, find and tilt back the tab securing the board in place.

Lift the motherboard out of the lower frame.

Step 6

              Composite Video Port               

• Desolder the leads for the composite video port that are circled.
• Remove the video port from the board.
• For help with soldering view the iFixit soldering guide.

Desolder the leads for the composite video port that are circled.

Remove the video port from the board.

For help with soldering view the iFixit soldering guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    William                     

Member since: 01/30/2015

1,591 Reputation

                                      10 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges                           

Team

                       University of Kentucky Louisville, Team 1-6, Rountree Winter 2015                        

                                                  Member of University of Kentucky Louisville, Team 1-6, Rountree Winter 2015 



                    LOUISVILLE-ROUNTREE-W15S1G6                     


                                            4 Members                     


                                            10 Guides authored