Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- Rosewill RK-9000V2 BR Keyboard Disassembly
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackRosewill RK-9000V2 BR Keyboard
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove warranty sticker
- Disconnect keyboard. from the USB cable.
- Flip keyboard upside down.
- Locate “O.K” sticker. It is at the top-center, above the rectangular product info sticker.
- Remove the sticker. THIS VOIDS THE WARRANTY. Notice that “VOID” text is uncovered when the sticker is removed.
- Use the Spudger to remove the sticker and to avoid scraping the keyboard
- The sticker is already removed in the attached image.
Disconnect keyboard. from the USB cable.
Flip keyboard upside down.
Locate “O.K” sticker. It is at the top-center, above the rectangular product info sticker.
Remove the sticker. THIS VOIDS THE WARRANTY. Notice that “VOID” text is uncovered when the sticker is removed.
Use the Spudger to remove the sticker and to avoid scraping the keyboard
The sticker is already removed in the attached image.
1024
Step 2
Remove screws
- Unscrew three (3) screws from keyboard bottom.
- Use the Phillips #1 bit
- The screws are circled in red in the attached image.
Unscrew three (3) screws from keyboard bottom.
Use the Phillips #1 bit
The screws are circled in red in the attached image.
Step 3
Unsnap device
- Unsnap all eight (8) points connecting the upper case to the bottom of the case. After all snaps are released, lift the bottom out of the housing from the bottom.
- There are four (4) snap points on the top of the case and four (4) on the bottom.
- See image for snap locations. They are highlighted with red rectangles in the image. I drew black ticks with a marker to identify them.
- Prying the Spudger can help loosen the snaps. The small, blue opening tool is also useful to help open the snaps
- DO NOT TWIST the case housing! The bottom housing should be easy to lift from the top of the keyboard if all eight snaps are released.
Unsnap all eight (8) points connecting the upper case to the bottom of the case. After all snaps are released, lift the bottom out of the housing from the bottom.
There are four (4) snap points on the top of the case and four (4) on the bottom.
See image for snap locations. They are highlighted with red rectangles in the image. I drew black ticks with a marker to identify them.
Prying the Spudger can help loosen the snaps. The small, blue opening tool is also useful to help open the snaps
DO NOT TWIST the case housing! The bottom housing should be easy to lift from the top of the keyboard if all eight snaps are released.
Step 4
- Turn keyboard over. Remove top housing.
- Clean keyboard. Mine collects skin particles and hair
- I taped a piece of paper to where the three LEDs shine through the housing. See attached image This dims them when they are on. The the LEDs are bright, so dark/thick paper is most useful.
Turn keyboard over. Remove top housing.
Clean keyboard. Mine collects skin particles and hair
I taped a piece of paper to where the three LEDs shine through the housing. See attached image This dims them when they are on. The the LEDs are bright, so dark/thick paper is most useful.
To reassemble your device, follow these instructions in reverse order:
- Place the keyboard on the bottom housing in the correct orientation.Snap the top of the housing back over the bottom housing.Reattach the three screws.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jacob Patterson
Member since: 06/04/2021
109 Reputation
1 Guide authored
Badges:
1
