Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

1

  • Rowenta silent force extreme RO5931 main brush Teardown
  • 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackRowenta silent force extreme RO5931 main brush

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unplug the vacuum cleaner
  • Turn off the vacuum and unplug it from the outlet.
  • Unmount the main brush head from the cleaner pipe.

Turn off the vacuum and unplug it from the outlet.

Unmount the main brush head from the cleaner pipe.

1024

Step 2

              Remove the top cover
  • Unsnap the clips of the top cover with a small slot screwdriver.
  • Remove the top cover of the brush.

Unsnap the clips of the top cover with a small slot screwdriver.

Remove the top cover of the brush.

Step 3

              Unscrew the two top Philips screws
  • Unscrew both Philips screws from the top of the brush.

Unscrew both Philips screws from the top of the brush.

Step 4

              Unscrew security torx screws
  • Unscrew both security torx screws.

Unscrew both security torx screws.

Step 5

              Remove the top of the brush head
  • Smoothly and carefully take out the top of the brush head.
  • Take some time to search for the defect.
  • Remove broken pieces and repair if you can.
  • Clean up the inner parts of the brush with a smooth cloth. Remove dust, grains that could damage the inner parts of the brush.

Smoothly and carefully take out the top of the brush head.

Take some time to search for the defect.

Remove broken pieces and repair if you can.

Clean up the inner parts of the brush with a smooth cloth. Remove dust, grains that could damage the inner parts of the brush.

Step 6

              Check the handle of the brush retract is fixed
  • Push the retract button : the brush must be lowered.

Push the retract button : the brush must be lowered.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    David

Member since: 05/23/2014

1,415 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

vivaespana - Mar 28, 2022

Reply

My vacuum is similar to the one shown here. Only had it a few months, now the suction is not very good, and is not picking up. The cylinder is not spinning around. Any advice. Thanks in advance