Royal Heat Rs 100 Fuse Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          30 minutes            

Sections

2

• Front Panel
• 3 steps
• Fuse
• 1 step

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackRoyal Heat RS-100

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Panel               

• Unplug the power cord.
• Flip the device over so the bottom is facing up.
• Remove the two 10mm screws holding the back panel using a Phillips #2 screwdriver.

Unplug the power cord.

Flip the device over so the bottom is facing up.

Remove the two 10mm screws holding the back panel using a Phillips #2 screwdriver.

1024

Step 2

• Place the Flathead Screw driver parallel with the gap between the back and the heater body, then twist until the two parts of panel are separated. You may have to do this on four sides of the panel.
• Remove the front panel by pulling them apart. The front panel should come out easily.

Place the Flathead Screw driver parallel with the gap between the back and the heater body, then twist until the two parts of panel are separated. You may have to do this on four sides of the panel.

Remove the front panel by pulling them apart. The front panel should come out easily.

Step 3

• Remove the two dial caps from the two switches by lifting them up.

Remove the two dial caps from the two switches by lifting them up.

Step 4

              Fuse               

• Do not pry from the middle of the fuse because some fuses are made of glass.
• Pry one end of the fuse from the bracket until it is separated from the holder.
• Remove the fuse by lifting it up.

Do not pry from the middle of the fuse because some fuses are made of glass.

Pry one end of the fuse from the bracket until it is separated from the holder.

Remove the fuse by lifting it up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Long Tran                     

Member since: 10/14/2013

202 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 11-35, Amido Fall 2013                        

                                                  Member of Cal Poly, Team 11-35, Amido Fall 2013 



                    CPSU-AMIDO-F13S11G35                     


                                            4 Members                     


                                            7 Guides authored