Difficulty

Moderate

Steps

5

Time Required

                          15 - 25 minutes

Sections

1

  • Fan
  • 5 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackSpace Heater

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Fan
  • Make sure that the heater is unplugged and completely cooled down.
  • Turn the heater so the back is facing up.
  • Remove all six 14 mm screws using the Philips #0 screwdriver.

Make sure that the heater is unplugged and completely cooled down.

Turn the heater so the back is facing up.

Remove all six 14 mm screws using the Philips #0 screwdriver.

1024

Step 2

  • Separate the back case from the heater.

Separate the back case from the heater.

Step 3

  • You are left with the motor and wires attached to the front case.
  • Use the Phillips #1 screwdriver to remove the four 14 mm screws attaching the motor to the front case..
  • Do not untangle the wires

You are left with the motor and wires attached to the front case.

Use the Phillips #1 screwdriver to remove the four 14 mm screws attaching the motor to the front case..

Do not untangle the wires

Step 4

  • Turn the motor over to reveal the fan.
  • Use a plier to twist and unscrew the hexagonal screw attached to the fan.
  • Do not untangle the wires

Turn the motor over to reveal the fan.

Use a plier to twist and unscrew the hexagonal screw attached to the fan.

Do not untangle the wires

Step 5

  • Take the fan out.

Take the fan out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Mohammed Jubair Rabbani

Member since: 05/14/2021

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S1-G21, O'Regan Summer 2021                        

                                                  Member of York University, Team S1-G21, O'Regan Summer 2021 



                    YORK-O'REGAN-SU21S1G21                     


                                            1 Member                     


                                            1 Guide authored