Rubber Watch Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Battery
7 steps

Flags

BackWatch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Begin by placing the watch on its backside.

Begin by placing the watch on its backside.

1024

Step 2

Gently pull the top of the watch’s back until the cap detaches, in a peeling motion.
Pull out the white cap and green chip once it is free.

Gently pull the top of the watch’s back until the cap detaches, in a peeling motion.

Pull out the white cap and green chip once it is free.

Step 3

Carefully puncture the plastic casing next to the battery on top of the green chip with the X-Acto knife and stop.
Be careful not to insert the X-Acto knife too downward into the battery.

Carefully puncture the plastic casing next to the battery on top of the green chip with the X-Acto knife and stop.

Be careful not to insert the X-Acto knife too downward into the battery.

Step 4

Flip the chip around to the front.
In a chiseling motion, make an incision on the front side above the battery to cut out a plastic casing.
Make sure to hold the knife away from the hands in a safe, stable grip.
Remove the cut plastic casing over the battery.
The plastic casing should come off like a cap.

Flip the chip around to the front.

In a chiseling motion, make an incision on the front side above the battery to cut out a plastic casing.

Make sure to hold the knife away from the hands in a safe, stable grip.

Remove the cut plastic casing over the battery.

The plastic casing should come off like a cap.

Step 5

Gently remove the battery with a spudger or a wooden coffee stick.
Using too much force may detach the tab holding the battery and break the watch.
Once free, remove the dead battery.

Gently remove the battery with a spudger or a wooden coffee stick.

Using too much force may detach the tab holding the battery and break the watch.

Once free, remove the dead battery.

Step 6

Insert the new battery.
Place the cut plastic cap casing over the chip and battery.

Insert the new battery.

Place the cut plastic cap casing over the chip and battery.

Step 7

Place the white cap over the green chip.
Insert the white cap and green chip into the back of the watch with the spudger or wooden coffee stick.
Turn over the watch and check the power.

Place the white cap over the green chip.

Insert the white cap and green chip into the back of the watch with the spudger or wooden coffee stick.

Turn over the watch and check the power.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

Lee

Member since: 04/28/2017

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UC Davis, Team S2-G5, Cole Spring 2017                        

                                                  Member of UC Davis, Team S2-G5, Cole Spring 2017 



                    UCD-COLE-S17S2G5                     


                                            3 Members                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team