Difficulty
Easy
Steps
8
Time Required
15 minutes
Sections
1
- Gears
- 8 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackRuton Mixer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Gears
- Slightly loosen all four 2.54 cm Phillips #1 screws and remove them.
- Remove the top casing.
Slightly loosen all four 2.54 cm Phillips #1 screws and remove them.
Remove the top casing.
1024
Step 2
- Remove the button unit, including the spring.
Remove the button unit, including the spring.
Step 3
- Remove the 1.50 cm Phillips #1 screw that holds the cable clamp.
- Remove the cable clamp.
Remove the 1.50 cm Phillips #1 screw that holds the cable clamp.
Remove the cable clamp.
Step 4
- Lift the product from the bottom casing.
Lift the product from the bottom casing.
Step 5
- Lay the product on its side and remove the 1.27 cm Phillips #1 screw holding the bottom metal plate in place.
- Remove the metal plate holding the gears in place.
Lay the product on its side and remove the 1.27 cm Phillips #1 screw holding the bottom metal plate in place.
Remove the metal plate holding the gears in place.
Step 6
- Remove the gears.
Remove the gears.
Step 7
- Replace the gears with new ones.
Replace the gears with new ones.
Step 8
- Reassemble the mixer.
- Put the cable protection in the correct position before fastening the cable and reassembling the mixer.
Reassemble the mixer.
Put the cable protection in the correct position before fastening the cable and reassembling the mixer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Tijdelijk anoniem
Member since: 03/08/2017
101 Reputation
1 Guide authored
Badges:
2
Team
Delft University of Technology, Team S1-G23, Flipsen Spring 2017
Member of Delft University of Technology, Team S1-G23, Flipsen Spring 2017
TUD-FLIPSEN-S17S1G23
3 Members
1 Guide authored
Tibor Casteleijn - Nov 10, 2018
Reply
Hey, do you have a print file or do you know a place where i can buy these gears? Would really like to repair my own mixer.
