Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Bumper
- 3 steps
Flags
0
BackRydis H68 Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the vacuum over so that the wheels are facing you.
- Use a Phillips #1 screwdriver to remove the four 10mm screws that surround the battery cover.
Flip the vacuum over so that the wheels are facing you.
Use a Phillips #1 screwdriver to remove the four 10mm screws that surround the battery cover.
1024
Step 2
- Lift up the battery cover to reveal the battery.
- Remove the battery.
Lift up the battery cover to reveal the battery.
Remove the battery.
Step 3
Bumper
- Remove the eight 10 mm Phillips #1 screws.
Remove the eight 10 mm Phillips #1 screws.
Step 4
- Hold the front bumper and pull it off.
- It requires a lot of force to pull the bumper off.
Hold the front bumper and pull it off.
It requires a lot of force to pull the bumper off.
Step 5
- Pry off the back bumper by going around the entire top of the bumper with the metal spudger.
Pry off the back bumper by going around the entire top of the bumper with the metal spudger.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Joe Balduz
Member since: 02/15/2017
231 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
USFT-Lacy-S17S005G2
Member of USFT-Lacy-S17S005G2
Meetup
4 Members
10 Guides authored
