Difficulty

Moderate

Steps

9

Time Required

                          15 minutes

Sections

3

  • Battery
  • 2 steps
  • Bumper
  • 3 steps
  • Motherboard
  • 4 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackRydis H68 Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the vacuum over so that the wheels are facing you.
  • Use a Phillips #1 screwdriver to remove the four 10mm screws that surround the battery cover.

Flip the vacuum over so that the wheels are facing you.

Use a Phillips #1 screwdriver to remove the four 10mm screws that surround the battery cover.

1024

Step 2

  • Lift up the battery cover to reveal the battery.
  • Remove the battery.

Lift up the battery cover to reveal the battery.

Remove the battery.

Step 3

              Bumper
  • Remove the eight 10 mm Phillips #1 screws.

Remove the eight 10 mm Phillips #1 screws.

Step 4

  • Hold the front bumper and pull it off.
  • It requires a lot of force to pull the bumper off.

Hold the front bumper and pull it off.

It requires a lot of force to pull the bumper off.

Step 5

  • Pry off the back bumper by going around the entire top of the bumper with the metal spudger.

Pry off the back bumper by going around the entire top of the bumper with the metal spudger.

Step 6

              Motherboard
  • To access the motherboard entirely, lift the top portion of the vacuum off.

To access the motherboard entirely, lift the top portion of the vacuum off.

Step 7

  • Locate the four main 10mm screws on the underside of the motherboard.

Locate the four main 10mm screws on the underside of the motherboard.

Step 8

  • Use a Phillip’s #1 screwdriver to unscrew and remove the four 10 mm screws.

Use a Phillip’s #1 screwdriver to unscrew and remove the four 10 mm screws.

Step 9

  • Pinch the two tabs together, shown here, to loosen the motherboard out of the vacuum.
  • Lightly pull on the USB connector shown to lift the motherboard out.

Pinch the two tabs together, shown here, to loosen the motherboard out of the vacuum.

Lightly pull on the USB connector shown to lift the motherboard out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Jessica Alimonti

Member since: 02/17/2017

138 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USFT-Lacy-S17S005G2                        

                                                  Member of USFT-Lacy-S17S005G2 



                    Meetup                     


                                            4 Members                     


                                            10 Guides authored

Robert Kilgore - Jun 20, 2017

Reply

This was GREAT…. Lots of pics :-)

I was able to pull the mother board without much trouble. Mostly scared of breaking the connections.

NOW???? Where do I buy the darn thing?

Please respond,

Robert

Richard Suovanen - Jun 21, 2017

Unfortunately, it looks like Moneual had some fraud issues and went under in 2014. It may be difficult to get your hands on replacement parts for the Rydis H68 Pro. =[

naomi - Oct 23, 2017

Reply

where are the internal batteries CR2032 ?? I have heard that problems maybe due to internal batteries and not motherboard. Unable to get top off.

Do you know how to do a factory reset ? thank you. N. Tribley Oct. 23