Difficulty

Moderate

Steps

11

Time Required

                          5 - 10 minutes

Sections

3

  • Battery
  • 2 steps
  • Bumper
  • 3 steps
  • Wheel
  • 6 steps

Flags

0

  • BackRydis H68 Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the vacuum over so that the wheels are facing you.
  • Use a Phillips #1 screwdriver to remove the four 10mm screws that surround the battery cover.

Flip the vacuum over so that the wheels are facing you.

Use a Phillips #1 screwdriver to remove the four 10mm screws that surround the battery cover.

1024

Step 2

  • Lift up the battery cover to reveal the battery.
  • Remove the battery.

Lift up the battery cover to reveal the battery.

Remove the battery.

Step 3

              Bumper
  • Remove the eight 10 mm Phillips #1 screws.

Remove the eight 10 mm Phillips #1 screws.

Step 4

  • Hold the front bumper and pull it off.
  • It requires a lot of force to pull the bumper off.

Hold the front bumper and pull it off.

It requires a lot of force to pull the bumper off.

Step 5

  • Pry off the back bumper by going around the entire top of the bumper with the metal spudger.

Pry off the back bumper by going around the entire top of the bumper with the metal spudger.

Step 6

              Wheel assembly
  • Remove three 10mm Philips #1 screws that are securing the wheel assembly.

Remove three 10mm Philips #1 screws that are securing the wheel assembly.

Step 7

  • Remove the 10mm Phillips #1 screw securing the spring.
  • Then undo the spring from the plastic hook to completely remove it from the wheel assembly.

Remove the 10mm Phillips #1 screw securing the spring.

Then undo the spring from the plastic hook to completely remove it from the wheel assembly.

Step 8

  • Lift up on the plastic piece to remove the entire wheel assembly.

Lift up on the plastic piece to remove the entire wheel assembly.

Step 9

  • Remove the plastic frame by pulling outward on the two spots where it is fastened.

Remove the plastic frame by pulling outward on the two spots where it is fastened.

Step 10

  • Remove the four 10mm Phillips #1 screws around the edges of the cover.

Remove the four 10mm Phillips #1 screws around the edges of the cover.

Step 11

  • Lift up on the top cover to remove it.
  • Removing the top cover reveals the gear system consisting of three gears.

Lift up on the top cover to remove it.

Removing the top cover reveals the gear system consisting of three gears.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Shawn O'Meara

Member since: 02/27/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       1

Team

                       USFT-Lacy-S17S005G2                        

                                                  Member of USFT-Lacy-S17S005G2 



                    Meetup                     


                                            4 Members                     


                                            10 Guides authored