Difficulty
Easy
Steps
5
Time Required
15 minutes
Sections
1
- Rotator Handle
- 5 steps
Flags
0
BackRYOBI AG454
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rotator Handle
- Lay the handle on it’s side, with the screws facing up.
Lay the handle on it’s side, with the screws facing up.
1024
Step 2
- Remove the five 14mm screws from the rotating handle using the Phillips #1 screwdriver.
Remove the five 14mm screws from the rotating handle using the Phillips #1 screwdriver.
Step 3
- Take the top part of the handle off.
Take the top part of the handle off.
Step 4
- Unscrew the two 14mm screws from the clear bracket using the Phillips #1 screwdriver.
- Remove the bracket.
Unscrew the two 14mm screws from the clear bracket using the Phillips #1 screwdriver.
Remove the bracket.
Step 5
- Push handle rotation latch and seperate the rest of the handle from main body.
Push handle rotation latch and seperate the rest of the handle from main body.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Erica Faulkner
Member since: 09/18/2019
716 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
Embry-Riddle Aeronautical University, Team S12-G4, Lamothe Fall 2019
Member of Embry-Riddle Aeronautical University, Team S12-G4, Lamothe Fall 2019
ERAU-LAMOTHE-F19S12G4
4 Members
5 Guides authored
