Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Blade
- 4 steps
Flags
0
BackRyobi CSB125
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Blade
- Place the saw down on a flat surface with the blade facing up.
- Make sure that the saw is unplugged from any power source.
Place the saw down on a flat surface with the blade facing up.
Make sure that the saw is unplugged from any power source.
1024
Step 2
- Use the 7”/32 allen key to loosen the 5/16-18 x 9/16 in. blade screw.
Use the 7”/32 allen key to loosen the 5/16-18 x 9/16 in. blade screw.
Step 3
- Remove the 5/16-18 x 9/16 in. blade screw, spring washer, and the outer blade washer.
Remove the 5/16-18 x 9/16 in. blade screw, spring washer, and the outer blade washer.
Step 4
- Remove the blade from the saw.
Remove the blade from the saw.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Curtis Melo
Member since: 10/31/2019
1,039 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team S2-G1, Barthe Fall 2019
Member of UMass Dartmouth, Team S2-G1, Barthe Fall 2019
UMASSD-BARTHE-F19S2G1
3 Members
5 Guides authored
