Ryobi P202 Level Gauge Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          10 - 15 minutes            

Sections

3

• Battery
• 1 step
• Right Side Case
• 2 steps
• Level Gauge
• 1 step

Flags

0

• BackRyobi P202

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• The battery can shock you. Only touch plastic, non-conductive components.
• Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

The battery can shock you. Only touch plastic, non-conductive components.

Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

1024

Step 2

              Right Side Case               

• Use a Torx T10 screw driver to unscrew all ten 13.5 mm screws from the drill casing to gain access to the interior.

Use a Torx T10 screw driver to unscrew all ten 13.5 mm screws from the drill casing to gain access to the interior.

Step 3

• Gently lift the casing from the drill body.
• Take the casing completely off the drill body to gain access to the interior of the drill.
• The Ryobi P202 casing has Part #: 200690001

Gently lift the casing from the drill body.

Take the casing completely off the drill body to gain access to the interior of the drill.

The Ryobi P202 casing has Part #: 200690001

Step 4

              Level Gauge               

• Rotate the Drill 180 degrees so that the top is facing you.
• Lift the level gauge out from the top corner of the drill.
• The level gauge is Part #: 3000909

Rotate the Drill 180 degrees so that the top is facing you.

Lift the level gauge out from the top corner of the drill.

The level gauge is Part #: 3000909

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Joseph Eckstein                     

Member since: 04/07/2015

1,575 Reputation

                                      9 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Cal Poly, Team 17-6, Forte Spring 2015                        

                                                  Member of Cal Poly, Team 17-6, Forte Spring 2015 



                    CPSU-FORTE-S15S17G6                     


                                            4 Members                     


                                            10 Guides authored