Difficulty

Difficult

Steps

7

Time Required

                          20 minutes - 1 hour            

Sections

2

  • Battery
  • 2 steps
  • Direction of Rotation Selector
  • 5 steps

Flags

0

  • BackRyobi P235

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

  • The gray plastic forward/reverse piece may be damaged.The toggle piece attached to the switch assembly may be damaged.

The drill has to be disassembled to diagnose the problem from the two possible causes. This guide will help to diagnose and solve both problems.

What you need

Step 1

              Battery               
  • Push in both push tabs on the battery at the same time.
  • They are located below the green housing and are in the middle on both sides of the battery.

Push in both push tabs on the battery at the same time.

They are located below the green housing and are in the middle on both sides of the battery.

1024

Step 2

  • Pull the battery away from the drill housing while holding in both tabs.

Pull the battery away from the drill housing while holding in both tabs.

Step 3

              Direction of Rotation Selector               
  • Use a Phillips #2 screwdriver to remove the eight 16 mm screws that secure the housing.

Use a Phillips #2 screwdriver to remove the eight 16 mm screws that secure the housing.

Step 4

  • Use a T20 Torx screwdriver to remove the four 25.4 mm screws that secure the front of the housing.

Use a T20 Torx screwdriver to remove the four 25.4 mm screws that secure the front of the housing.

Step 5

  • Open the housing with the data label facing up.

Open the housing with the data label facing up.

Step 6

  • Lift the internal components out of the housing.

Lift the internal components out of the housing.

Step 7

  • Remove the gray plastic forward/reverse selector.

Remove the gray plastic forward/reverse selector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Justin Godleski                     

Member since: 03/19/2018

243 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team S4-G2, Saloman Fall 2019                        

                                                  Member of UMass Dartmouth, Team S4-G2, Saloman Fall 2019 



                    UMASSD-SALOMAN-F19S4G2                     


                                            3 Members                     


                                            6 Guides authored