Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
2
- Battery
- 1 step
- Reverse Switch
- 4 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackRyobi P271
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.
Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.
1024
Step 2
Reverse Switch
- Remove all ten Torx screws from the drill’s case.
Remove all ten Torx screws from the drill’s case.
Step 3
- Gently pull the casing apart.
- Separating the casing too quickly could cause internals to become loose, and not easily seat together upon reassembly.
Gently pull the casing apart.
Separating the casing too quickly could cause internals to become loose, and not easily seat together upon reassembly.
Step 4
- Remove the trigger so that it can fully expose the reverse switch.
Remove the trigger so that it can fully expose the reverse switch.
Step 5
- Firmly grab the reverse switch and pull on it until it comes out of its socket.
Firmly grab the reverse switch and pull on it until it comes out of its socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
nathan krehbiel
Member since: 11/05/2019
229 Reputation
2 Guides authored
Badges:
3
Team
UMass Dartmouth, Team S2-G6, Barthe Fall 2019
Member of UMass Dartmouth, Team S2-G6, Barthe Fall 2019
UMASSD-BARTHE-F19S2G6
3 Members
10 Guides authored
