Difficulty

Moderate

Steps

5

Time Required

                          15 - 25 minutes

Sections

2

  • Battery
  • 1 step
  • Trigger
  • 4 steps

Flags

0

  • BackRyobi P271

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

1024

Step 2

              Trigger
  • Remove the screws from the drill’s casing to gain access to the interior.

Remove the screws from the drill’s casing to gain access to the interior.

Step 3

  • Lift and remove the casing off of the drill body.

Lift and remove the casing off of the drill body.

Step 4

  • Carefully lift and remove the battery clip, trigger, motor, and everything connected to the wires and pull straight out of the drill.

Carefully lift and remove the battery clip, trigger, motor, and everything connected to the wires and pull straight out of the drill.

Step 5

  • Separate the wiring from the trigger and the motor using a soldering iron and them replace them with a new trigger and motor by soldering the wires back together.
  • Follow this guide for soldering tips.

Separate the wiring from the trigger and the motor using a soldering iron and them replace them with a new trigger and motor by soldering the wires back together.

Follow this guide for soldering tips.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    nathan krehbiel

Member since: 11/05/2019

229 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S2-G6, Barthe Fall 2019                        

                                                  Member of UMass Dartmouth, Team S2-G6, Barthe Fall 2019 



                    UMASSD-BARTHE-F19S2G6                     


                                            3 Members                     


                                            10 Guides authored