Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- Blade
- 4 steps
Flags
0
BackRyobi P501G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Blade
- Locate the area where the blade is connected to the motor, where the circular covering is on the Ryobi P501G.
Locate the area where the blade is connected to the motor, where the circular covering is on the Ryobi P501G.
1024
Step 2
- Unscrew clockwise and remove the bearing in the middle, connecting the blade to the motor. This will also allow removal of the blade guard.
Unscrew clockwise and remove the bearing in the middle, connecting the blade to the motor. This will also allow removal of the blade guard.
Step 3
- Remove the four black screws holding the black bearing and remove the bearing itself.
Remove the four black screws holding the black bearing and remove the bearing itself.
Step 4
- Once the black bearing is off, remove the transparent cover of the blade.
- Once the cover is off, remove the blade.
- Place the new blade with the flat notches lined up with the flat notches on the motor axle.
Once the black bearing is off, remove the transparent cover of the blade.
Once the cover is off, remove the blade.
Place the new blade with the flat notches lined up with the flat notches on the motor axle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Eeshan Mishra
Member since: 01/24/2019
412 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team S1-G2, Maness Spring 2019
Member of Cal Poly, Team S1-G2, Maness Spring 2019
CPSU-MANESS-S19S1G2
4 Members
7 Guides authored
