Ryobi P501G Motor Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

1

• Motor
• 5 steps

Flags

0

• BackRyobi P501G

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motor               

• Locate the screws at the top face of the saw, on the green plastic surface covering.

Locate the screws at the top face of the saw, on the green plastic surface covering.

1024

Step 2

• Locate the eight outer screws of the plastic green encasement. They are marked in red in the picture.
• Using a T15 torx screwdriver, unscrew all the holes, taking care not to lose any!

Locate the eight outer screws of the plastic green encasement. They are marked in red in the picture.

Using a T15 torx screwdriver, unscrew all the holes, taking care not to lose any!

Step 3

• Open up the top side of the encasement to reveal the internal parts of the saw.
• Locate the motor.

Open up the top side of the encasement to reveal the internal parts of the saw.

Locate the motor.

Step 4

• Using the T15 torx screwdriver, unscrew all four of the screws to free the motor from the encasement.

Using the T15 torx screwdriver, unscrew all four of the screws to free the motor from the encasement.

Step 5

• Remove the motor and replace with a new one if needed.
• Be careful when handling the motor- it may be very dirty/greasy. You might want to wear gloves for this step!

Remove the motor and replace with a new one if needed.

Be careful when handling the motor- it may be very dirty/greasy. You might want to wear gloves for this step!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Sophia Arias                     

Member since: 04/21/2019

255 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team S1-G2, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S1-G2, Maness Spring 2019 



                    CPSU-MANESS-S19S1G2                     


                                            4 Members                     


                                            7 Guides authored