Difficulty
Moderate
Steps
6
Time Required
30 minutes
Sections
1
- Top Case
- 6 steps
Flags
0
BackRyobi P516
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top Case
- Using the 5mm hex key included at the base of the saw, loosen the set screw at the front of the saw.
- The front guard will now slide out from the front of the saw.
Using the 5mm hex key included at the base of the saw, loosen the set screw at the front of the saw.
The front guard will now slide out from the front of the saw.
1024
Step 2
- Remove the two 10mm T20 Torx screws from the front of the saw.
- Pull out the front plate.
Remove the two 10mm T20 Torx screws from the front of the saw.
Pull out the front plate.
Step 3
- Start at the middle of the device and begin to pry up the rubber grip.
- Pull the rubber portion inside out towards the front of the saw.
Start at the middle of the device and begin to pry up the rubber grip.
Pull the rubber portion inside out towards the front of the saw.
Step 4
- Remove all twelve 14mm T20 Torx screws from the main case of the device.
Remove all twelve 14mm T20 Torx screws from the main case of the device.
Step 5
- Remove the four 35mm Phillips #2 screws.
- Pry the two case halves apart starting at the middle of the saw.
- Watch out for any loose parts from inside the saw that may fall out during this step.
Remove the four 35mm Phillips #2 screws.
Pry the two case halves apart starting at the middle of the saw.
Watch out for any loose parts from inside the saw that may fall out during this step.
Step 6
- Continue splitting the case until the top piece of the case is free and set it aside.
Continue splitting the case until the top piece of the case is free and set it aside.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 5 other contributors
Cameron Davis
Member since: 09/16/2019
243 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Embry-Riddle Aeronautical University, Team S8-G4, Salas Fall 2019
Member of Embry-Riddle Aeronautical University, Team S8-G4, Salas Fall 2019
ERAU-SALAS-F19S8G4
4 Members
1 Guide authored
