Difficulty

Moderate

Steps

6

Time Required

                          5 - 15 minutes

Sections

3

  • Top Cap
  • 3 steps
  • Switch Trigger
  • 1 step
  • Power Switch
  • 2 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackRyobi RS290G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Cap
  • Remove two 20mm and one 16mm Phillips #2 screws from the housing assembly and exhaust port.

Remove two 20mm and one 16mm Phillips #2 screws from the housing assembly and exhaust port.

1024

Step 2

  • Remove the three 16mm Phillips #2 screws from the top cap/upper grip.

Remove the three 16mm Phillips #2 screws from the top cap/upper grip.

Step 3

  • Remove the top cap.

Remove the top cap.

Step 4

              Switch Trigger
  • Remove the switch trigger.

Remove the switch trigger.

Step 5

              Power Switch
  • Slide the power switch out of the housing assembly by carefully gripping the power switch and sliding upward from the base.

Slide the power switch out of the housing assembly by carefully gripping the power switch and sliding upward from the base.

Step 6

  • Slide the red and black leads from the power switch using a spudger.

Slide the red and black leads from the power switch using a spudger.

To reassemble your device, follow these instructions in reverse order. After reassembling, perform an operational check before using.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Cameron Scott Williams

Member since: 09/17/2019

136 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Embry-Riddle Aeronautical University, Team S22-G5, Branham Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S22-G5, Branham Fall 2019 



                    ERAU-BRANHAM-F19S22G5                     


                                            4 Members                     


                                            5 Guides authored