Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
2
- Filter
- 2 steps
- Motor
- 2 steps
Flags
0
BackRyobi VC120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Filter
- Pull the black nose off of the body of the vacuum, by pushing in the orange button closest to the nose.
Pull the black nose off of the body of the vacuum, by pushing in the orange button closest to the nose.
1024
Step 2
- Grab the filter with two fingers and slide it out.
Grab the filter with two fingers and slide it out.
Step 3
Motor
- Using a Philips head screwdriver, remove the four screws located on the side panel of the vacuum.
- There are two types of screws on this device. You may want to use a magnetic screw pad to organize your screws to be sure they return to their designated holes.
- 4x 19.1mm
- 1x 14.3mm
- Once the screws are removed, you should be able to separate the side panel from the rest of the device.
Using a Philips head screwdriver, remove the four screws located on the side panel of the vacuum.
There are two types of screws on this device. You may want to use a magnetic screw pad to organize your screws to be sure they return to their designated holes.
4x 19.1mm
1x 14.3mm
Once the screws are removed, you should be able to separate the side panel from the rest of the device.
Step 4
- Pull your motor out, and remove the black and red cables from the motor by hand.
Pull your motor out, and remove the black and red cables from the motor by hand.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Allison Schoch
Member since: 09/16/2015
689 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
IUPUI, Team 2-4, Baechle Fall 2015
Member of IUPUI, Team 2-4, Baechle Fall 2015
IUPUI-BAECHLE-F15S2G4
3 Members
8 Guides authored
