Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

  • Piston Head Seals / O-rings
  • 10 steps

Flags

2

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSaeco Incanto SBS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This is the version with the Glasball.

What you need

Step 1

              Piston Head Seals / O-rings
  • I show you the O-rings in the top piston of the brewgroup. I don’t write much, because my english is bad, but the photos speak for themselves. Good luck
  • Two screws, PZ 1
  • Careful, there is a spring.

I show you the O-rings in the top piston of the brewgroup. I don’t write much, because my english is bad, but the photos speak for themselves. Good luck

Two screws, PZ 1

Careful, there is a spring.

1024

Step 2

  • Spring, O-ring and a GLASBALL.

Spring, O-ring and a GLASBALL.

Step 3

  • Ja

Ja

Step 4

  • Remove the piston. More information in my guide " Disassembling & Cleaning the Brewgroup" here.

Remove the piston. More information in my guide " Disassembling & Cleaning the Brewgroup" here.

Step 5

  • Screw PZ 1
  • Counterrotate turning the screw.
  • Then pull that thing and you find another seal

Screw PZ 1

Counterrotate turning the screw.

Then pull that thing and you find another seal

Step 6

  • Details

Details

Step 7

  • Tools for cleaning, ja toothbrush

Tools for cleaning, ja toothbrush

Step 8

  • There are two types of O-rings. For this type of piston you need the smaller.

There are two types of O-rings. For this type of piston you need the smaller.

Step 9

  • Grease it a liitle.
  • Just put it back, no problem.

Grease it a liitle.

Just put it back, no problem.

Step 10

  • …and then I found a crack in my piston. That can not be repaired. So I had to buy a new piston.

…and then I found a crack in my piston. That can not be repaired. So I had to buy a new piston.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Schwarzstein

Member since: 07/15/2013

2,741 Reputation

                                      13 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges