Difficulty
Easy
Steps
6
Time Required
35 minutes
Sections
1
- Descale support valve
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSaeco Vienna Sup 018
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Prepare descaling liquid
1024
Step 2
Enter test mode
- Switch off the coffee machine
- Press and hold the coffee and steam buttons while switching the machine on -> The test mode is activated
- The test mode is not indicated by any LEDs. I found the information about the test mode on www.m-landmann.eu, among other things
Switch off the coffee machine
Press and hold the coffee and steam buttons while switching the machine on -> The test mode is activated
The test mode is not indicated by any LEDs. I found the information about the test mode on www.m-landmann.eu, among other things
Step 3
Move the brewing group to the brewing position
- Set volume control (green) to minimum (all the way to the left)
- Press and hold the steam button until the LED next to the coffee cup lights up (yellow mark)
- The brew group is now in the brewing position and the support valve (pink) is activated.
Set volume control (green) to minimum (all the way to the left)
Press and hold the steam button until the LED next to the coffee cup lights up (yellow mark)
The brew group is now in the brewing position and the support valve (pink) is activated.
Step 4
Descale
- The quantity regulation remains at minimum.
- Place a (large) empty cup under the spout
- Press and hold the coffee button until the pump dispenses approximately one cup of liquid. For information: The error display flashes approx. 600 times for 200ml of water.
- wait about 20 minutes ( to take full effect)
- Pump out the rest of the descaling liquid in cups, pausing the pumping with 3-minute breaks.
The quantity regulation remains at minimum.
Place a (large) empty cup under the spout
Press and hold the coffee button until the pump dispenses approximately one cup of liquid. For information: The error display flashes approx. 600 times for 200ml of water.
wait about 20 minutes ( to take full effect)
Pump out the rest of the descaling liquid in cups, pausing the pumping with 3-minute breaks.
Step 5
Rinse the brew group
- Rinse out the water tank and fill it up with clear water
- Pour off a few cups of water as in the last step, rinsing out the remains of the citric acid.
Rinse out the water tank and fill it up with clear water
Pour off a few cups of water as in the last step, rinsing out the remains of the citric acid.
Step 6
Place the brewing group into sleep mode
- Set the volume control to the middle and hold down the steam button until the LED next to the coffee button lights up. The brew group is now back in its original position.
- Switch off the machine and switch it on again as usual - Descaling complete.
Set the volume control to the middle and hold down the steam button until the LED next to the coffee button lights up. The brew group is now back in its original position.
Switch off the machine and switch it on again as usual - Descaling complete.
Cancel: I did not complete this guide.
One other person completed this guide.
oldturkey03 is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
oldturkey03
Author
with 1 other contributor
Peter Scholl
Member since: 06/26/2021
1,031 Reputation
6 Guides authored
Badges:
13
+10 more badges
