Difficulty
Moderate
Steps
7
Time Required
Suggest a time??
Sections
1
- Saeco XSmall disassembly
- 7 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSaeco XSmall repair
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Saeco XSmall disassembly
- Disconnect the power plug!
- Remove pomace containers, water tank and brew unit
Disconnect the power plug!
Remove pomace containers, water tank and brew unit
1024
Step 2
- Remove the lid of the bean container and remove all coffee beans.
- Remove the three Torx T10 screws securing the bean container.
- The finger guard made of black plastic for the grinder is attached with a Phillips screw. Remove it to remove the finger guard.
- Pull the bean container vertically up and remove it.
Remove the lid of the bean container and remove all coffee beans.
Remove the three Torx T10 screws securing the bean container.
The finger guard made of black plastic for the grinder is attached with a Phillips screw. Remove it to remove the finger guard.
Pull the bean container vertically up and remove it.
Step 3
- Take a photo of the grinder or note the position of the adjuster.
- Pull the grinder adjuster upwards.
Take a photo of the grinder or note the position of the adjuster.
Pull the grinder adjuster upwards.
Step 4
- Place the machine on its side. At the bottom of the top cover, to the left and right of the coffee spout, are two Torx T10 screws. Remove those.
Place the machine on its side. At the bottom of the top cover, to the left and right of the coffee spout, are two Torx T10 screws. Remove those.
Step 5
- The cover over the coffee spout is held by detents. To release those insert a plastic opening tool. Start at the bottom, release the cover and set it aside.
The cover over the coffee spout is held by detents. To release those insert a plastic opening tool. Start at the bottom, release the cover and set it aside.
Step 6
- The top cover is now only held by detents. At the front side of bottom are two tabs that go into the bottom plate, which you have to consider when removing it.
- Pay attention to the steam pipe.
- Start at the back seam with opening. Gently pry with a plastic opening tool to split it.
- When the detents are released, carefully lift the cover upwards with your hand and tilt it diagonally forward. Watch for the tabs that are in the bottom plate.
- The steam pipe is still in the front cover. You must push the cover over the steam pipe when lifting it.
The top cover is now only held by detents. At the front side of bottom are two tabs that go into the bottom plate, which you have to consider when removing it.
Pay attention to the steam pipe.
Start at the back seam with opening. Gently pry with a plastic opening tool to split it.
When the detents are released, carefully lift the cover upwards with your hand and tilt it diagonally forward. Watch for the tabs that are in the bottom plate.
The steam pipe is still in the front cover. You must push the cover over the steam pipe when lifting it.
Step 7
- The coffeemaker is now open
- The water heater
- The coffee grinder
The coffeemaker is now open
The water heater
The coffee grinder
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
oldturkey03
VauWeh
Lucy Smith
Author
with 1 other contributor
VauWeh
Member since: 10/19/2015
160,518 Reputation
211 Guides authored
Badges:
41
+38 more badges
wm1994 - Jun 20, 2019
Reply
Vielen Dank! Die Anleitung war uns gut geholfen.
