Samsung 500C Chromebook Wireless Card Replacement Repair Guide

Difficulty

Moderate

Steps

2

Time Required

                          10 - 15 minutes            

Sections

1

• Wireless Card
• 2 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung XE500C21-H01 ChromeBook

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Wireless Card               

• Remove the back panel of the device by taking out the seven screws on the back panel of the device.
• Four of the screws are under the rubber feet so they will need to be removed. To remove the feet, pry them off with the spudger.

Remove the back panel of the device by taking out the seven screws on the back panel of the device.

Four of the screws are under the rubber feet so they will need to be removed. To remove the feet, pry them off with the spudger.

1024

Step 2

• Locate the wireless card. It is shown highlighted in picture one.
• Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in picture two.
• Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.

Locate the wireless card. It is shown highlighted in picture one.

Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in picture two.

Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Garrett Kissinger                     

Member since: 02/24/2014

704 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Michigan Tech, Team 1-2, Lauer Spring 2014                        

                                                  Member of Michigan Tech, Team 1-2, Lauer Spring 2014 



                    MTU-LAUER-S14S1G2                     


                                            3 Members                     


                                            10 Guides authored