Samsung Ativ Book 9 Lite Audio Port Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Audio Port/USB2/Display Port Board
4 steps

Flags

BackSamsung ATIV Book 9 Lite
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Audio Port/USB2/Display Port Board

Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement.
Turn the laptop upside down to show the screws holding the back cover on.
Using a Phillips #0, remove the ten 4mm screws located around the edges and one central.

Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement.

Turn the laptop upside down to show the screws holding the back cover on.

Using a Phillips #0, remove the ten 4mm screws located around the edges and one central.

1024

Step 2

Use two plastic opening tools to separate the back cover from the laptop.
This may take some force because the back cover is snapped into place before the screws are used to keep it in place.

Use two plastic opening tools to separate the back cover from the laptop.

This may take some force because the back cover is snapped into place before the screws are used to keep it in place.

Step 3

Using your hands move the black and white wires that are layered on top of the board to be out of the way of the removal.
Using a Phillips #0, remove three 3.5mm screws.

Using your hands move the black and white wires that are layered on top of the board to be out of the way of the removal.

Using a Phillips #0, remove three 3.5mm screws.

Step 4

Using your hands remove the cord that connects the speakers to the board you are removing.
Do not pull on the cord as that might damage it; remove it by pulling on the white wire head.
Using your hands, remove the board from the computer.

Using your hands remove the cord that connects the speakers to the board you are removing.

Do not pull on the cord as that might damage it; remove it by pulling on the white wire head.

Using your hands, remove the board from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Phat Tran

Member since: 09/16/2018

750 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Washington State, Team S2-G5, Hope Fall 2018                        

                                                  Member of Washington State, Team S2-G5, Hope Fall 2018 



                    WSU-HOPE-F18S2G5                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team