Difficulty

Moderate

Steps

4

Time Required

                          15 minutes            

Sections

1

  • Hard Drive
  • 4 steps

Flags

0

  • BackSamsung ATIV Book 9 Lite

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hard Drive               
  • Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement.
  • Turn the laptop upside down to show the screws holding the back cover on.
  • Using a Phillips #0, remove the ten 4mm screws located around the edges and one central.

Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement.

Turn the laptop upside down to show the screws holding the back cover on.

Using a Phillips #0, remove the ten 4mm screws located around the edges and one central.

1024

Step 2

  • Use two plastic opening tools to separate the back cover from the laptop.
  • This may take some force because the back cover is snapped into place before the screws are used to keep it in place.

Use two plastic opening tools to separate the back cover from the laptop.

This may take some force because the back cover is snapped into place before the screws are used to keep it in place.

Step 3

  • Using your hands or a plastic opening tool, release the yellow motherboard connection strip on both ends by lifting the clamps.
  • Remove the strip to reveal the hard drive.

Using your hands or a plastic opening tool, release the yellow motherboard connection strip on both ends by lifting the clamps.

Remove the strip to reveal the hard drive.

Step 4

  • Using a Phillips #0, remove the two 3mm screws holding the hard drive in place.
  • Remove the hard drive by pulling it out with your hands.

Using a Phillips #0, remove the two 3mm screws holding the hard drive in place.

Remove the hard drive by pulling it out with your hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Phat Tran                     

Member since: 09/16/2018

750 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Washington State, Team S2-G5, Hope Fall 2018                        

                                                  Member of Washington State, Team S2-G5, Hope Fall 2018 



                    WSU-HOPE-F18S2G5                     


                                            4 Members                     


                                            5 Guides authored