Samsung Ativ Book 9 Plus Charger Port Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          4 - 8 minutes            

Sections

2

• Back Cover
• 2 steps
• Charger Port
• 4 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackSamsung ATIV Book 9 Plus

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Turn the laptop upside down so that the underside of the laptop is facing you.
• Use a Phillips #000 screwdriver to unscrew the 4.3 mm screws located on the edges and corners of the laptop.

Turn the laptop upside down so that the underside of the laptop is facing you.

Use a Phillips #000 screwdriver to unscrew the 4.3 mm screws located on the edges and corners of the laptop.

1024

Step 2

• Lift the cover to reveal the interior of the laptop.

Lift the cover to reveal the interior of the laptop.

Step 3

              Charger Port               

• Unscrew the 4.3mm screws holding down the plastic cover using a #000 screwdriver. After the screws are out remove the cover.
• Remove the 4.3 mm screw holding down the metal cover using a #000 screwdriver.

Unscrew the 4.3mm screws holding down the plastic cover using a #000 screwdriver. After the screws are out remove the cover.

Remove the 4.3 mm screw holding down the metal cover using a #000 screwdriver.

Step 4

• Disconnect the charging port from the motherboard by gently tugging on the plastic part of the connection.

Disconnect the charging port from the motherboard by gently tugging on the plastic part of the connection.

Step 5

• Wedge a plastic opening tool or spudger in between the laptop casing and the port. Pry until you feel it release.
• This will take some force because the port is glued to the casing.

Wedge a plastic opening tool or spudger in between the laptop casing and the port. Pry until you feel it release.

This will take some force because the port is glued to the casing.

Step 6

• Remove the disconnected charger port.

Remove the disconnected charger port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Casey Kauffman                     

Member since: 11/06/2017

302 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S6-G6, Baechle Fall 2017                        

                                                  Member of IUPUI, Team S6-G6, Baechle Fall 2017 



                    IUPUI-BAECHLE-F17S6G6                     


                                            3 Members                     


                                            3 Guides authored