Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

3

  • Back Cover
  • 2 steps
  • Internal Fans
  • 3 steps
  • Heatsink Assembly
  • 3 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackSamsung ATIV Book 9 Plus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Turn the laptop upside down so that the underside of the laptop is facing you.
  • Use a Phillips #000 screwdriver to unscrew the 4.3 mm screws located on the edges and corners of the laptop.

Turn the laptop upside down so that the underside of the laptop is facing you.

Use a Phillips #000 screwdriver to unscrew the 4.3 mm screws located on the edges and corners of the laptop.

1024

Step 2

  • Lift the cover to reveal the interior of the laptop.

Lift the cover to reveal the interior of the laptop.

Step 3

              Internal Fans
  • The fans should be in the upper left corner of the laptop if the laptop is oriented with the battery in the bottom half.
  • Gently lift the fans’ black connector strip out of the way.

The fans should be in the upper left corner of the laptop if the laptop is oriented with the battery in the bottom half.

Gently lift the fans’ black connector strip out of the way.

Step 4

  • Using a Phillips head screwdriver, unscrew four 4.55 mm Phillips #000 screws that bind the fans.

Using a Phillips head screwdriver, unscrew four 4.55 mm Phillips #000 screws that bind the fans.

Step 5

  • Disconnect the white connectors by gently tugging on them.
  • Lift the fans from their positions.

Disconnect the white connectors by gently tugging on them.

Lift the fans from their positions.

Step 6

              Heatsink Assembly
  • Using a Phillips head screwdriver #000 unscrew the motherboard from the rest of the components.

Using a Phillips head screwdriver #000 unscrew the motherboard from the rest of the components.

Step 7

  • Disconnect the two cables shown in the picture by gently pulling them off.

Disconnect the two cables shown in the picture by gently pulling them off.

Step 8

  • Using a Phillips #000 screwdriver, unscrew the three labeled screws to detach the heatsink assembly.

Using a Phillips #000 screwdriver, unscrew the three labeled screws to detach the heatsink assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Ryan Smith

Member since: 04/01/2019

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S7-G7, Wilson Spring 2019                        

                                                  Member of IUPUI, Team S7-G7, Wilson Spring 2019 



                    IUPUI-WILSON-S19S7G7                     


                                            3 Members                     


                                            2 Guides authored