Samsung Ativ Book 9 Plus Np930X5J S01Us Screen Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          15 minutes            

Sections

2

• Battery
• 4 steps
• Screen
• 6 steps

Flags

0

• BackSamsung ATIV Book 9 Plus NP930X5J-S01US

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop.

Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop.

1024

Step 2

• Press the button to release the bottom cover.

Press the button to release the bottom cover.

Step 3

• Remove the five 4.3mm Phillips #00 screws from the battery.

Remove the five 4.3mm Phillips #00 screws from the battery.

Step 4

• Lift the battery with both hands and remove.

Lift the battery with both hands and remove.

Step 5

              Screen               

• Disconnect the display cable from the motherboard.

Disconnect the display cable from the motherboard.

Step 6

• Disconnect the black and white antenna cables from the Wi-Fi card.

Disconnect the black and white antenna cables from the Wi-Fi card.

Step 7

• Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets.

Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets.

Step 8

• Remove the eight silver 4.2mm Phillips #00 screws from the corner.

Remove the eight silver 4.2mm Phillips #00 screws from the corner.

Step 9

• Pry up the metal hinges from the laptop.

Pry up the metal hinges from the laptop.

Step 10

• Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside.

Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Sean Kim                     

Member since: 04/12/2018

640 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UW Tacoma, Team S1-G2, Liner Spring 2018                        

                                                  Member of UW Tacoma, Team S1-G2, Liner Spring 2018 



                    UWT-LINER-S18S1G2                     


                                            5 Members                     


                                            4 Guides authored                     

Steerpike - Nov 8, 2019

Reply

There’s no need to remove the battery. Just disconnect its power socket if you want to be ‘careful’.