Samsung Ativ Book 9 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Speaker
5 steps

Flags

BackSamsung ATIV Book 9 Lite
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker

Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement.
Turn the laptop upside down to show the screws holding the back cover on.
Using the Phillips #0, remove the ten 4mm screws located around the edges and one central.

Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement.

Turn the laptop upside down to show the screws holding the back cover on.

Using the Phillips #0, remove the ten 4mm screws located around the edges and one central.

1024

Step 2

Use two plastic opening tools to separate the back cover from the laptop.
This may take some force because the back cover is snapped into place before the screws are used to keep it in place.

Use two plastic opening tools to separate the back cover from the laptop.

This may take some force because the back cover is snapped into place before the screws are used to keep it in place.

Step 3

Using the Phillips #0, remove the seven 5mm screws highlighted in the image.
Using your hands, disconnect the battery’s main cord from the main motherboard.
Using your hands, remove the battery from the computer.

Using the Phillips #0, remove the seven 5mm screws highlighted in the image.

Using your hands, disconnect the battery’s main cord from the main motherboard.

Using your hands, remove the battery from the computer.

Step 4

Using a Phillips #1, remove the two 3mm screws, one per speaker.
Using the nylon spudger, release the black and red wires that connect the two speakers.

Using a Phillips #1, remove the two 3mm screws, one per speaker.

Using the nylon spudger, release the black and red wires that connect the two speakers.

Step 5

Using your hands, remove the cord that connects the speakers to the board you are removing.
Do not pull on the cord as that might damage it; remove it by pulling on the white wire head.
Using your hands remove the speakers from the computer. This may require some force as they are held in place partially by double sided tape.

Using your hands, remove the cord that connects the speakers to the board you are removing.

Do not pull on the cord as that might damage it; remove it by pulling on the white wire head.

Using your hands remove the speakers from the computer. This may require some force as they are held in place partially by double sided tape.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Phat Tran

Member since: 09/16/2018

750 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Washington State, Team S2-G5, Hope Fall 2018                        

                                                  Member of Washington State, Team S2-G5, Hope Fall 2018 



                    WSU-HOPE-F18S2G5                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team