Difficulty

Easy

Steps

5

Time Required

                          5 minutes

Sections

2

  • Samsung BD-D5500 Disassembly
  • 2 steps
  • Disc Drive
  • 3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSamsung BD-D5500

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Samsung BD-D5500 Disassembly
  • To begin, turn the device over so that the bottom is facing up. There are 9 black clips that attach the plastic body to the case. Remove these clips from the case.

To begin, turn the device over so that the bottom is facing up. There are 9 black clips that attach the plastic body to the case. Remove these clips from the case.

1024

Step 2

  • Use a Phillips #2 screwdriver to remove the screw that attaches the top cover to the rear of the device. This will allow you to remove the cover.
  • This is how your device will look after you remove the top.

Use a Phillips #2 screwdriver to remove the screw that attaches the top cover to the rear of the device. This will allow you to remove the cover.

This is how your device will look after you remove the top.

Step 3

              Disc Drive
  • Please locate your disc drive
  • Your disc drive should look like the one pictured. If your disc drive does not look as follows please confirm that you are looking at the right guide.

Please locate your disc drive

Your disc drive should look like the one pictured. If your disc drive does not look as follows please confirm that you are looking at the right guide.

Step 4

  • Once you have located your disc drive it is time to remove the drive
  • You will see four silver 1.1mm Phillips #2 screws located on each corner of the disc drive.

Once you have located your disc drive it is time to remove the drive

You will see four silver 1.1mm Phillips #2 screws located on each corner of the disc drive.

Step 5

  • Once you have removed the four screws using a Phillips #2 screwdriver you are now able to take out the disc drive
  • Carefully remove the disc drive being sure not to disrupt anything else in the Blu-Ray player.
  • This is how your disc drive should look if you have removed it from the player correctly.

Once you have removed the four screws using a Phillips #2 screwdriver you are now able to take out the disc drive

Carefully remove the disc drive being sure not to disrupt anything else in the Blu-Ray player.

This is how your disc drive should look if you have removed it from the player correctly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Kenya Wilson

Member since: 01/29/2018

226 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       University of Alabama, Team S2-G5, Bedsole Spring 2018                        

                                                  Member of University of Alabama, Team S2-G5, Bedsole Spring 2018 



                    UA-BEDSOLE-S18S2G5                     


                                            4 Members                     


                                            6 Guides authored