Difficulty

Easy

Steps

4

Time Required

                          5 minutes

Sections

1

  • Samsung BD-D6500 Disassembly
  • 4 steps

Flags

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBlu-ray Disc Player

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove side covers.
  • Start by turning the device over.
  • On each side there are three black tabs that hold each side cover on.
  • Carefully pry up on each one with a flat head screwdriver (or similar) and each side cover should pop right off.
  • Set side covers aside.

Start by turning the device over.

On each side there are three black tabs that hold each side cover on.

Carefully pry up on each one with a flat head screwdriver (or similar) and each side cover should pop right off.

Set side covers aside.

1024

Step 2

              Remove rear screw.
  • Remove the single screw in the center of the rear panel that holds the cover on.

Remove the single screw in the center of the rear panel that holds the cover on.

Step 3

              Lift the side retainers and remove the cover.
  • Under where each side panel was there are two black retainers that hold the top to the sides of the case.
  • Lift each side up carefully to loosen them.
  • Then carefully pry up on the single rear retainer (just to the right of the component out connectors) and the whole case cover should come right off.

Under where each side panel was there are two black retainers that hold the top to the sides of the case.

Lift each side up carefully to loosen them.

Then carefully pry up on the single rear retainer (just to the right of the component out connectors) and the whole case cover should come right off.

Step 4

              End result.
  • This is what the inside of the machine should look like.
  • The layout is fairly straight forward.
  • With the power cord pointing towards you, the motherboard is on the left, the drive assembly is in the middle, and the power supply is on the right.

This is what the inside of the machine should look like.

The layout is fairly straight forward.

With the power cord pointing towards you, the motherboard is on the left, the drive assembly is in the middle, and the power supply is on the right.

To reassemble your device, follow these instructions in reverse order. Be sure to attach the front side of the cover first and “tilt” back into place so the front clips end up properly attached.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Chris Deierlein

Member since: 05/04/2018

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       2