Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
2
- Outer Cover
- 2 steps
- WIFI Card
- 1 step
Flags
0
BackSamsung BD-E5400
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Outer Cover
- Remove the two 10mm Phillips #1 screws.
- Remove the one 8 mm Phillips #1 screw.
- Carefully lift up the cover and lay back, to ensure that you do not damage the attached cable.
Remove the two 10mm Phillips #1 screws.
Remove the one 8 mm Phillips #1 screw.
Carefully lift up the cover and lay back, to ensure that you do not damage the attached cable.
1024
Step 2
- Unplug the small wiring bundle attaching the body of the device to the cover.
- Lay the cover aside.
Unplug the small wiring bundle attaching the body of the device to the cover.
Lay the cover aside.
Step 3
WIFI Card
- The Wi-Fi card is the light blue component circled in red.
- Separate the body of the Wi-Fi card from the black plastic cover.
- Unplug the wires of the Wi-Fi card from the motherboard.
The Wi-Fi card is the light blue component circled in red.
Separate the body of the Wi-Fi card from the black plastic cover.
Unplug the wires of the Wi-Fi card from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Cameron Herring
Member since: 08/28/2018
306 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
IUPUI, Team S1-G3, Arle Fall 2018
Member of IUPUI, Team S1-G3, Arle Fall 2018
IUPUI-ARLE-F18S1G3
3 Members
4 Guides authored
