Difficulty
Moderate
Steps
6
Time Required
25 minutes
Sections
1
- DC Power Board
- 6 steps
Flags
3
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackSamsung BD-F5700
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
DC Power Board
- Remove the three 10mm screws with a Phillips #0 screwdriver.
- Pry the top off with a plastic opening tool.
Remove the three 10mm screws with a Phillips #0 screwdriver.
Pry the top off with a plastic opening tool.
1024
Step 2
- Remove the three screws holding down the cover with a Phillips #0 screwdriver.
Remove the three screws holding down the cover with a Phillips #0 screwdriver.
Step 3
- Lift up the power cord at its base to remove it.
Lift up the power cord at its base to remove it.
Step 4
- Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.
Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.
Step 5
- Remove the 7mm screw with a Phillips #1 screwdriver.
- Grip the blue tab attached to the base and pull upwards.
Remove the 7mm screw with a Phillips #1 screwdriver.
Grip the blue tab attached to the base and pull upwards.
Step 6
- Grip the edges of the motherboard and pull upwards to remove.
Grip the edges of the motherboard and pull upwards to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
samer odeh
Member since: 02/13/2018
313 Reputation
1 Guide authored
Badges:
3
Team
USF Tampa, Team S16-G4, Boczar Spring 2018
Member of USF Tampa, Team S16-G4, Boczar Spring 2018
USFT-BOCZAR-S18S16G4
4 Members
4 Guides authored