Samsung Bd F5900 Power Supply Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 minutes            

Sections

2

• Top Cover
• 2 steps
• Power Supply
• 3 steps

Flags

0

• BackSamsung BD-F5900

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Cover               

• Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.
• Tilt the back of the top cover forward to remove from chassis.

Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.

Tilt the back of the top cover forward to remove from chassis.

1024

Step 2

• Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

Step 3

              Power Supply               

• Using a #1 Phillips head screwdriver, remove the two 7.5mm screws on top of the plastic cover and remove the cover.

Using a #1 Phillips head screwdriver, remove the two 7.5mm screws on top of the plastic cover and remove the cover.

Step 4

• Press down on the plastic retaining clip and pull backwards to remove the AC power connector from the power supply board.

Press down on the plastic retaining clip and pull backwards to remove the AC power connector from the power supply board.

Step 5

• Using the plastic spudger tool, gently pry on either side of main power connector (CON801) to disconnect from main logic board.
• Pry a little bit on each side of board until the board lifts away.
• Tilt the board forward and lift up to remove from the chassis.

Using the plastic spudger tool, gently pry on either side of main power connector (CON801) to disconnect from main logic board.

Pry a little bit on each side of board until the board lifts away.

Tilt the board forward and lift up to remove from the chassis.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Louis McKean                     

Member since: 10/18/2017

501 Reputation

                                      5 Guides authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team S1-G21, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G21, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G21                     


                                            3 Members                     


                                            5 Guides authored