Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
2
- Top Cover
- 2 steps
- WiFi Module
- 2 steps
Flags
0
BackSamsung BD-F5900
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top Cover
- Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.
- Tilt the back of the top cover forward to remove from chassis.
Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.
Tilt the back of the top cover forward to remove from chassis.
1024
Step 2
- Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.
Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.
Step 3
WiFi Module
- Disconnect the WiFi board cable connector from the main logic board
Disconnect the WiFi board cable connector from the main logic board
Step 4
- Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.
- Slightly tilt the WiFi module sideways to remove from chassis.
Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.
Slightly tilt the WiFi module sideways to remove from chassis.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Louis McKean
Member since: 10/18/2017
501 Reputation
5 Guides authored
Badges:
3
Team
USF Tampa, Team S1-G21, Cagle Fall 2017
Member of USF Tampa, Team S1-G21, Cagle Fall 2017
USFT-CAGLE-F17S1G21
3 Members
5 Guides authored