Samsung Bd F7500 Blu Ray Player Power Cord Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Power Cord
5 steps

Flags

BackSamsung BD-F7500
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Power Cord

Use a Phillips head #J1 screwdriver to remove all three (3) 10 mm screws.

Use a Phillips head #J1 screwdriver to remove all three (3) 10 mm screws.

1024

Step 2

While firmly gripping the gray, metal base, lift the black plastic cover off the device.
The case is clamped onto the edges of the device, so bending of the plastic top will be required. Don’t be afraid to use some force, it is unlikely that it will break.
Be careful not to tear ribbon cables attached to the outer cover.

While firmly gripping the gray, metal base, lift the black plastic cover off the device.

The case is clamped onto the edges of the device, so bending of the plastic top will be required. Don’t be afraid to use some force, it is unlikely that it will break.

Be careful not to tear ribbon cables attached to the outer cover.

Step 3

Using the Philips head #J1 bit, remove the three (3) 10 mm screws that secure the plastic cover.
Gently remove the plastic cover.

Using the Philips head #J1 bit, remove the three (3) 10 mm screws that secure the plastic cover.

Gently remove the plastic cover.

Step 4

To remove the power cord, gently apply pressure to the tab located at the base of the cord and lift the cord with your fingers.

To remove the power cord, gently apply pressure to the tab located at the base of the cord and lift the cord with your fingers.

Step 5

Locate the black plastic tab located on the power cord.
Using a spudger, gently insert the tool into the crack, to allow space for the wire to slide out.
Pull the plastic tab off of the wire, so that it can be placed on the replacement power cord.

Locate the black plastic tab located on the power cord.

Using a spudger, gently insert the tool into the crack, to allow space for the wire to slide out.

Pull the plastic tab off of the wire, so that it can be placed on the replacement power cord.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    James McMicheal

Member since: 09/28/2017

511 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Eastern Washington University, Team S2-G6, Crane Fall 2017                        

                                                  Member of Eastern Washington University, Team S2-G6, Crane Fall 2017 



                    EWU-CRANE-F17S2G6                     


                                            4 Members                     


                                            5 Guides authored

Jane Grey - Jan 22, 2022

Where can one find a replacement cord?

Introduction#

What you need#

Team#

Introduction

What you need

Team