Difficulty
Moderate
Steps
10
Time Required
35 minutes
Sections
1
- Motherboard
- 10 steps
Flags
0
BackSamsung BD-H5100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Use the Phillips Head #2 screwdriver to remove the three 10mm screws on the back panel.
Use the Phillips Head #2 screwdriver to remove the three 10mm screws on the back panel.
1024
Step 2
- Use the plastic spudger to pry open the top panel.
- Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.
Use the plastic spudger to pry open the top panel.
Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.
Step 3
- Pull the ribbons gently from one corner by the blue tabs to remove it.
Pull the ribbons gently from one corner by the blue tabs to remove it.
Step 4
- Remove the two 7.5mm screws on both sides of the disk tray with Phillips Head #2 screwdriver.
Remove the two 7.5mm screws on both sides of the disk tray with Phillips Head #2 screwdriver.
Step 5
- Push two small prongs on both sides inwards and push forward.
- Remove the disk tray.
Push two small prongs on both sides inwards and push forward.
Remove the disk tray.
Step 6
- Use a Phillips Head #2 to remove the two 7.5mm screws on the black cover.
- Remove the black cover.
Use a Phillips Head #2 to remove the two 7.5mm screws on the black cover.
Remove the black cover.
Step 7
- Pinch the white clip and pull straight up on the power cord.
- Remove the power cord.
Pinch the white clip and pull straight up on the power cord.
Remove the power cord.
Step 8
- Use a Phillips Head #2 to remove the 7.5mm screw.
Use a Phillips Head #2 to remove the 7.5mm screw.
Step 9
- Use your finger to pry the metal tab slightly up.
- This may break after several uses.
Use your finger to pry the metal tab slightly up.
This may break after several uses.
Step 10
- Slide out the Motherboard.
- Be careful when touching the bottom because it is sharp.
Slide out the Motherboard.
Be careful when touching the bottom because it is sharp.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Mira Patel
Member since: 10/11/2016
580 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 1-2, Leahy Fall 2016
Member of USF Tampa, Team 1-2, Leahy Fall 2016
USFT-LEAHY-F16S1G2
3 Members
5 Guides authored
