Samsung Brightside Logic Board Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 20 minutes            

Sections

1

• Logic board
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSamsung Brightside

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Logic board               

• Here is the Samsung SCH-U380 Brightside
• Turn it over to gain access to the battery.
• Remove the backcover by simply pulling it off the phone from the top down

Here is the Samsung SCH-U380 Brightside

Turn it over to gain access to the battery.

Remove the backcover by simply pulling it off the phone from the top down

1024

Step 2

• Remove the battery
• Remove the six Phillips screws from the back frame
• All six screws are identical M1.5X3

Remove the battery

Remove the six Phillips screws from the back frame

All six screws are identical M1.5X3

Step 3

• Use a plastic opening tool or similar tool to separate the top from the bottom frame. Applying slight pressure in a downwards direction will disengage the plastic clips
• Continue to slide the tool along the slot until you feel the plastic locks disengage
• Once all locks have released, the bottom frame can simply be removed.

Use a plastic opening tool or similar tool to separate the top from the bottom frame. Applying slight pressure in a downwards direction will disengage the plastic clips

Continue to slide the tool along the slot until you feel the plastic locks disengage

Once all locks have released, the bottom frame can simply be removed.

Step 4

• Remove the two Phillips screws from the EMI shield.
• Both screws are identical M1.5X2
• Remove the EMI shield

Remove the two Phillips screws from the EMI shield.

Both screws are identical M1.5X2

Remove the EMI shield

Step 5

• Detach the LCD connector.
• Remove the logic board

Detach the LCD connector.

Remove the logic board

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                    oldturkey03                     

Member since: 09/29/2010

722,317 Reputation

                                      109 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges                           

Team

                       Global Fixers                        

                                                  Member of Global Fixers 



                    Community                     


                                            22 Members                     


                                            240 Guides authored