Difficulty
Moderate
Steps
9
Time Required
30 minutes
Sections
3
- Battery
- 3 steps
- Rear Case
- 4 steps
- Camera Assembly
- 2 steps
Flags
0
BackSamsung Captivate
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.
- Lift up the back cover.
Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.
Lift up the back cover.
1024
Step 2
- Place your finger on the bottom of the battery and lift to remove.
Place your finger on the bottom of the battery and lift to remove.
Step 3
- Replace the old battery with the new one.
Replace the old battery with the new one.
Step 4
Rear Case
- Insert the spudger underneath the bottom section of the phone.
- Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.
Insert the spudger underneath the bottom section of the phone.
Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.
Step 5
- Remove the six 4.5mm #000 Phillips screws.
Remove the six 4.5mm #000 Phillips screws.
Step 6
- Starting at a bottom corner, use the spudger to separate the rear case from the front display.
- Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.
- Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.
Starting at a bottom corner, use the spudger to separate the rear case from the front display.
Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.
Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.
Step 7
- Separate the rear case from the phone.
Separate the rear case from the phone.
Step 8
Camera Assembly
- Use the spudger tool to pry up the chip labeled “NEC.” This releases the chip.
Use the spudger tool to pry up the chip labeled “NEC.” This releases the chip.
Step 9
- Gently lift the camera assembly out of the plastic housing.
Gently lift the camera assembly out of the plastic housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Drew Bentz
Member since: 09/22/2011
565 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 20-25, Maness Fall 2011
Member of Cal Poly, Team 20-25, Maness Fall 2011
CPSU-MANESS-F11S20G25
3 Members
9 Guides authored
tracy mann - Jan 29, 2012
Reply
Is this for the front facing camera
Will Budney - Jan 30, 2012
No, this is for the rear facing camera. The Samsung Captivate does not have a front facing camera.